Support Forum

Some important informations regarding drive wheel axle of the 1/6 scale Cromwell: The shaft consists of an M8 threaded rod. It is necessary to mill the flats on the threaded rod. At least one groove on each axis is required. Even hand milled with a Dremel will suffice. Secure the screws on the bevel...

Yes, sure.
Its a good mod.

Thank you for sharing. Interesting stuff. The barrel is already removable in the stock design, but not so easily. I usually dont put screw on the servo arm so that the barrel can be removed quickly. As for the metal wheel inserts, this year we started shipping metal inserts with the new kits. But th...

If you had filament between the gears, it could have been a bad pressure setting (of these gears). It can also happen with improper retraction settings or simply with a nozzle clog (even partial). Alternatively, when you're printing too fast at a low temperature and it doesn't melt the plastic. Then...

Hi. Sorry for the very, very late reply. I hadn't noticed this topic. I don't know if it will help anymore but still... I've built a lot of these models and still prefer to paint some parts separately. Especially small details, wheel rims and stuff like that. So for myself i say i prefer to do it se...

You're right.I didn't notice that the link doesn't work anymore.
I've edited it.
I may add more alternatives in time.

Thank you.
Yes, there is a huge amount of room inside in these big tanks.
You can put PB (lead) battery there, some big speaker and you will still have a lot of empty space there.

Welcome.
I hope that you will enjoy printing and building.
I am here to help.I guess that i will be able to solve every possible issue.

Hi.Sorry for the late reply.
Unfortunately, i dont have searched for any other sources.
But i can check.
Where are you from?What is the "better" source for you?

That looks really great.
Actually, it looks better than my own Cromwell, i think.
Congratulations.